We are fast managing difficult works.
Impossible ones takes us a little more time.

RE-CORTA, on the basis of its knowledge and experience, has developed a wide and flexible area of consultancy and technical assistance, which carries out projects for technical demolition.

The activity fields in which the area is structured, enables us to have a personalised, flexible and complete offer of services, which is the perfect ally to attend each client’s specific needs.

Robot demolition

We have available a large range of track mounted robots with various different cutting and breaking systems.

✓ Wide range of working tools can be utilised such as hammers, shearing heads, breakers and cutting heads.
✓ All robots are operated by remote control.
✓ Remotely controlled machines offer extremely high levels of safety from mechanical, electrical and chemical risk.
✓ Operators and robots can work together in confined spaces without the risk of emiting dangerous gases.
✓ Possibility to work in confined spaces.
✓ The use of robots facilitates the subsequent processing of residues.
✓ Machines are prepared for working in high risk working areas along with machine operators.

Sectioning with wall saw

It is frequently used for the sectioning of reinforced concrete structures or stone.

✓ Great surface finish in the cutting section. It entails a significant saving in the preparation of the perimeter.
✓ It allows for the sectioning of non-uniform volumes (concrete, steel, etc.).
✓ The good cutting feed, reduces the cost of execution.
✓ Security of this type of equipment is extreme as regards mechanic, electric and chemical risks and is remarkably increased by remote control.
✓ Flush cutting.
✓ It does not generate cracks or vibrations.

Hand held diamond chain sawing

The technique of diamond chain sawing is a hand held method of making special small precision cuts where other cutting techniques are not practical or cost effective.

✓ Hydraulic drive allows underwater cutting possibilities.
✓ Easy to manipulate the machine.
✓ The cutting system eliminates danger from chemicals, electric shock and significantly reduces risk of mechanical failure.
✓ Cutting system is very versatile.
✓ The operator is totally independent.
✓ Many types of small complex cuts can be achieved.
✓ Cutting does not create vibrations, cracking or high cutting pressures on the workpiece material.

Floor sawing

Our modern and high power floor saws permit long continuous cuts at various depths. Typical applications include: Bridge deck sawing, concrete slab sawing and asphalt pavements.

✓ The method allows fast cutting of large surfaces.
✓ High sawing performance is achieved due to the machines high power.
✓ Handling of the machine requires minimum effort from the operator.
✓ Accident risk is reduced considerably.
✓ No dust is generated.
✓ Precision cuts are made leaving a high quality sawn area.

Diamond wire sawing

Permits a very diverse complexity of cutting large concrete or stone structures.

✓ A very versatile system that can be combined with other demolition systems.
✓ Cutting is totally vibration free, allowing the cutting of large and delicate structures.
✓ Remote control ensures a safer working environment with respect to electrical, mechanical or chemical risk.
✓ Sawing finish is always neat and clean.
✓ Sawing action is always extremely quiet.
✓ Hydraulic drive system allows underwater working.
✓ Different diamond wire designs allow a multitude of materials to be cut which include concrete, stone, steel, aluminium…

Alternate breaking systems

In the event that it is necessary to break the material (reinforced concrete or stone) in a pre determined direction without the requirement of quality or precision breakage. Hydraulic jacks may be used in conjuction with wedges and or expansive cement.

✓ Vibrations and noise levels are minimal.
✓ The efficiency of the breaking system can offer advantages when compared to conventional breaking methods.
✓ Breakage can be pre determined to achieve the required size of broken material.
✓ Can be used in conjuction with other demolition techniques.
✓ Hydraulic fed jacks can be used under water.

Diamond drilling

We can perform drilling with different diameters and depths, practically in any type of material.

✓ It provides a smooth and accurate finish, leaving the structure ready for the next task.
✓ It is extremely cost-effective, due to the complexity of drilling with other methods.
✓ The security is perfectly defined, from the mechanic, electric and chemic points of view.
✓ Its handling does not entail great physical efforts and it can be remotely controlled.
✓ Drilling under water is possible.
✓ It does not generate vibrations, pressures or cracks.

Waste management

We manage our waste in an effective and efficient manner documenting the customer at all times of the correct traceability.

✓ To offer complete solutions for our customers from the technical demolition to the complete removal of residues.
✓ Reduce the overall cost of removing rubble.
✓ Increase working safety, using measures to ease material transport.
✓ Eliminate consequential structural damage, especially in historic buildings by avoiding prolonged movement of heavy work materials.
✓ Assist and encourage operators to accomplish the work with the best efficiency.

8 GESTION DE RESIDUOS 2

Worksite recycling

Reciclaje en Obra
We manage our waste in an effective and efficient manner documenting the customer at all times of the correct traceability.

✓ To offer complete solutions for our customers from the technical demolition to the complete removal of residues.
✓ Reduce the overall cost of removing rubble.
✓ Increase working safety, using measures to ease material transport.
✓ Eliminate consequential structural damage, especially in historic buildings by avoiding prolonged movement of heavy work materials.
✓ Assist and encourage operators to accomplish the work with the best efficiency.

Now, do you need any help? Let's talk